How to use HDD REGENERATOR, thru bootable USB



Lets assume you already have create or  have boot-able USB, (Otherwise Click to Download)
1.) When starting the computer / pc / laptop, u must enter to BIOS or. Boot Menu directly thru shortcut key function, it is usually access by F12


PS:  others shortcut keys to BOOTMENU depends on motherboard:  (MSI = F11) , (ASUS = F8), (EMAXX = ESC), (BIOSTAR = F9)..


2.) When entering BIOS go boot menu tab, then find the  Hard Disk  Drive Priorities press ENTER




change the values and set to select the USB boot-able





Then press F10 to Save and Exit, press Yes to confirm

3.) Select your flash drive / usb (Sandisk, Toshiba, Samsung)...be sure not to select the one that has UEFI (do not select UEFI)!!!



4.) Now it will load you bootable USB


Note:   Click to Enlarge Image

  • the  Main Menu consist of all tools menu
  • Enter Backup Menu
  • Enter HDD REGENERATOR
  •  Select the Hard Disk you want to scan. input a number then press "Enter"
  • Select Number input "2" to normal scan
  • Select Number input "1" to scan and repair
  • 5.) Well Done!, your hard drive now is on scan.. wait and have patience :)
*Note*:  if you see hard disk is not detected.. make sure you don't stop or pause the operation, because it is the indicator that a bad sector has been detected..

that is all, thanks for reading..







Comments